CleanerNet and AT&T U-Verse

CleanerNet works with any ISP. 

If you’re on AT&T U-Verse, you probably have a modem/router that AT&T supplied as part of their service. To add CleanerNet, you’ll need to log into that AT&T modem and disable the wireless signal. You can then plug ClenaerNet into the back of the modem and use the signal from the CleanerNet router for a protected WiFi connection.

This article might help: http://geekbeat.tv/how-to-use-your-own-router-with-att-u-verse/ 

Tip: Before you change anything about your existing setup, be sure to activate your CleanerNet system at thecleanernet.com. During setup, set the WiFi name and password to be the same as that which your U-Verse is broadcasting. When you make the switch and plug in the CleanerNet system, all of your devices will automatically connect to the new router!

 

This article only applies to those wishing to use a CleanerNet enabled router. This does not apply to the Mini.